*Our Brand WD Solar Roller Shades Style 4000 Phifer 5% Open

Our Brand Roller Shades Style 4000 is a 3 Ply Vinyl shade in a cross stitched pattern of 4 multiple subdued earth stone colors.This is one of the Phifer fabric groups that are so popular and often called solar shades by other competitors. This shade is composed of 35% PVE-Fiberglass and 65% cotton-PVC blend that combines to make is a sun fade resistant product. This blind can be used for privacy or any form of sun protection needed. The shade disperses the suns rays into a soft glow, that allows one to see out but not be able to see in easily during bright sunlight. There is no thermal protection given by this shade.

Change the size below to see your price

$49.25

Dense sheer solar sheer product.Opacity (OPENNESS 5%)FABRIC WILL BE ROTATED 1/4 TURN TO MAKE YOUR BLIND WIDER THAN 96 INCHES.

 

Clutch Solar Roller Shades

woodland-solar

Manufactured Using Only the Best:

Phifer Fabrics and RollEase Hardware Systems

R Series Clutch Systems
3" and 4" Fascia System
R120 Cassette System

In the Fastest Production Time:

1 Business Day
Normal Orders received by 7:00 AM ship the next day

5 of the Most Popular Series of SheerWeave Fabrics from Phifer, Inc.:

Series 2390 / 2360 / 2410 / 2500

Series 3000

Series 4000 / 4100 / 4400

Series 5000

Series 7000

Extensive Solar Roller Shade Specifications

P06 Chalk View Larger
P07 Alabaster View Larger
P10 Granite View Larger
Q12 Pebblestone View Larger
Q15 Greystone View Larger
Q16 Tobacco View Larger
V07 Pewter View Larger
V10 Ebony View Larger
V15 Ash View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Roller Shades

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for brackets and correct installation.  Roller shades have generally large deductions due to the nature of the product (roller and hardware) -PLEASE CALL FOR SPECIFIC FABRIC AND TUBE DEDUCTIONS. Fabric is usually minimally-         1 1/8" or more from ordered width on inside mount .

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Solar Shades or Roller Shades, make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions