Our Brand Quick Ship Budget Woven Woods Cordless

Priced as low as

Based upon a size of 24x36

These quick ship woven wood shades have a match stick type design. Perfect for that porch or cottage window covering.

Priced as low as

Based upon a size of 24x36

Natural woods Collection

The Quick ship program allows for pre-made products to be cut down and sent out fast!

Phase !! woven woods

How to install click here !

Eastfield Teak View Larger
Eastfield Ash View Larger
Ashbury Camel View Larger
Hatteras Camel View Larger
Montauk Camel View Larger
Sarasota Camel View Larger
Winthrop Camel View Larger
Hatteras Cocoa View Larger
Winthrop Tortoise View Larger
Bayhead Natural View Larger
Bayhead-WhiteWash View Larger
Bayhead-GreyTint View Larger
Eastfield Umber View Larger
Sarasota Cocoa View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measuring for Woven Woods

Inside Mount Width
•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will make the correct deduction from the total width to allow for proper installation.  Most manufacturers’ deduct 3/8” from the total width.

Inside Mount Height
•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width
•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    For Woven Woods make sure the measurement overlaps the window opening by at least 2" on each side to ensure light control and privacy I

Outside Mount Height
•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allow for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Installation Instructions-Click Here