Bali Essentials 3-8 inch Single Light Filtering Cellular Blind Standard and Cordless

Priced as low as

Based upon a size of 24x36

Bali Essentials Cellular Blind is on a quick ship program. This blind is offered in 4 colors. These blinds are shipped out in 4-5 working days. Your confirming email will say 2-3 weeks but disregard that message. This product is the same color on both sides of the shade. The color on the inside is the same as outside.

Priced as low as

Based upon a size of 24x36


Value Cellular Shades

An affordable way to improve energy efficiency

  • Honeycomb design insulates window
  • Stylish 3/8" single-cell design
  • Good sound absorption
  • Color-coordinated vinyl headrail
  • Quick and easy installation


Comprehensive Bali Cellular Specifications

White 1401 View Larger
Alabaster 1402 View Larger
Latte 1404 View Larger
Truffle 1403 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instructions