Bali 2 inch Vinyl Horizontal Blinds Foundations

Priced as low as
$40.85

Based upon a size of 24x36

Bali Foundations 2 inch horizontal blinds are room darkening and coordinate with the vertical blind collection. Foundations has a smooth no texture slat in 7 colors. The horizontal slats are neutral to the street side when tilted closed.

IF YOU CHOOSE A CORDED TILT OR LIFT OPTION:
A new safety standard has been taken into effect limiting the manufacturing of corded blinds in response to fears they could injure or kill children and/or pets by strangulation.
Starting December 15 2018, most products must either be cordless or have shorter, inaccessible cords. Cords will be made 1/3 of the ordered height of the blind, but custom length cords can be requested at the time of order. To avoid order questions, if you need longer cords especially for higher windows, please specify the length controls that will work for you in the order comments box.

Priced as low as
$40.85

Based upon a size of 24x36

Bali logo Blindsexpress Logo

2inch vinyl pic
   
Vinyl horizontal blinds. Offering the same great benefits as aluminum horizontal blinds, 2" vinyl horizontal blinds also offer an assortment of up-to-date colors, textures, and patterns.
   

   

2 inch vinyl privacy
   
2" specification guide
   
   
   
   
   

 

Hopscotch 7051 View Larger
Cocoa 7005 View Larger
Sand 7093 View Larger
Classic 7325 View Larger
Foam 7112 View Larger
Snow 7205 View Larger
Fog 7050 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Vinyl Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.



Installation instruction-Details