Bali Aluminum 1 inch Lightblocker 8 gauge Cordless blind

Bali Aluminum 8 gauge 1 inch blind that is the strongest blind of the Bali aluminum program. Heavy duty 1" x 1 1/2" steel headrail. Sleek, light-blocking headrail requires no valance. Clutch wand tilter and cordless lift system. Color coordinated components. Hidden bracket system for top and back mount blinds.

Change the size below to see your price

$65.45

Bali Horizontal Aluminum

Tilt Type

 
  • Wand Tilt with Cord Lift
    Option Choice Picture Clear plastic wand rotates left or right to tilt the blinds and adjust the privacy and light level in the room (standard).
  • Cordless Lift with Wand Tilt
    Option Choice Picture Ideal for homes with children or pets, the Cordless Lift System eliminates dangling cord hazards of traditional cord-controlled window treatments and provides a cleaner, more orderly appearance.  Our unique handle design allows operation of hard to reach windows using the adjustable skypoles.

Privacy Option

For maximum privacy and light control, rout holes are placed further back on the slats. Closing blinds eliminates light gaps.

Standard Route Holes
Option Choice Picture
 
Hidden Holes
Option Choice Picture

 

Click Here to View Specifications

Little Boy Blue 090 View Larger
Lavender Lace 024 View Larger
White Pearl 637 View Larger
Vanilla 100 View Larger
True White 544 View Larger
True Blue 089 View Larger
Snowcap White 386 View Larger
Real Red 085 View Larger
Milk Chocolate 060 View Larger
Lamplight 904 View Larger
Flax 541 View Larger
Hunter Green 154 View Larger
Fawn Pearl 327 View Larger
Fawn 031 View Larger
Desert Sand 625 View Larger
Crystal White 629 View Larger
Coconut 630 View Larger
Char Brown 062 View Larger
Cameo 607 View Larger
Burgundy 653 View Larger
Brushed Aluminum 121 View Larger
Black Satin 233 View Larger
Beige Pearl 328 View Larger
Beige 011 View Larger
Aluminum 034 View Larger
Almost White Gloss 065 View Larger
Alabaster Pearl 326 View Larger
Alabaster 112 View Larger
Polished Aluminum 741 View Larger
Princess Pink 023 View Larger
Canary Yellow 009 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Aluminum Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside, Outside, Ceiling Mount or Special Shape with Box Brackets 78146-00

Inside, Outside or Ceiling Mount With Hidden Brackets 78196-01 (1.2 MB)

Inside & Outside Mount with Side-mount Brackets 78195-00 (137 KB)