Bali 2 inch Faux Wood Blinds

Bali Faux blind features a genuine woodgrain appearance. Moisture resistant slats that will not warp under humid conditions.

Change the size below to see your price

$42.72

Cornices are now available for this product see cart below.

Bali Blinds 2" Faux Wood blinds are made with moisture-proof PVC so slats are easy to clean and will not warp in high-humidity areas. Available in light and dark solid colors. Embossed slats add a unique sense of texture and the light-blocking headrail provides greater light control.

Tilt Type

  • Wand Tilt
    Option Choice Picture

    Color-coordinated wood wand rotates left or right to tilt the blinds and adjust the privacy and light levels in the room.

  • Cord Tilt
    Option Choice Picture

    This standard control uses two color-coordinated cords instead of a wand to tilt the blind. Cords include color-coordinated tassels.

  • Cordless Lift with Wand Tilt
    Option Choice Picture

    The elimination of dangling cords improves safety in the home and provides a cleaner appearance. Wand tilt standard.

  • Standard Valance
    Option Choice Picture Attractive 2 1/2" valance features a clean, simple profile. Standard valance makes a great finishing touch for Wood and Faux Wood Blinds alike.
  • Eloquence Valance
    Option Choice Picture This 3 1/4" valance features attractively contoured lines that complement virtually any molding style.

Bali blinds puts all of their specifications in an adobe pdf file that is small and easy to download. Click here for Bali Wood Blind Specifications

Sandblasted White 5951 View Larger
Brandy 5736 View Larger
Dark Oak 5709 View Larger
Coconut 5630 View Larger
Almond Butter 5724 View Larger
Buttermilk 5078 View Larger
White 5035 View Larger
Natural 5007 View Larger
Milky Way 5058 View Larger
Sandblasted Buttermilk 5953 View Larger
Sandblasted Coconut 5299 View Larger

Tips To Remember:
Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance    allowance.

Measure For Wood or Faux Wood Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 1/2 of an inch deduction from the total width to a lot for brackets and correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. 2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    An Outside Valance with returns will be wider than the ordered width to accommodate covering the headrail and mount.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.

Inside Mount Installation Instructions

Outside Mount Installation Instructions