Levolor Accordia Cellular Designer Textures 9/16 Std cord or cordless options

Levolor Cellular 9-16 Designer Textures honeycomb blinds in this size cell makes it a perfect fit for every window. Delightful upscale textures with a rainbow of colors.

Change the size below to see your price


Designer Textures 9/16 is comprised of several fabrics including a very soft cellular shade fabric. The soft hand enhances the elegant appearance of the fabric. A wide array of neutrals and fashion colors in solids and prints make room coordination easy. Light-filtering Cordless headrails are color coordinated but the cord loop headrails are always off white.

Cream 19370202 View Larger
Frost 19370201 View Larger
Denim 19370834 View Larger
Sage 19370803 View Larger
Everglade 19370219 View Larger
Dove 19370239 View Larger
Mink 19370209 View Larger
Toffee 19370216 View Larger
Candlelight 19370204 View Larger
Whisper 19370200 View Larger
Snow 19370199 View Larger
Sand 19370247 View Larger
Ocean 19370240 View Larger
Sterling 19370802 View Larger
Dijon 19370212 View Larger
Navy 19370234 View Larger
Merlot 19370245 View Larger
Tumbleweed 19370207 View Larger
Daylight 19370203 View Larger
Sangria 19370801 View Larger
Red Pepper 19370271 View Larger
Terra Cotta 19370825 View Larger
Mocha 19370272 View Larger
Espresso 19370804 View Larger
Slate 19370800 View Larger
Black 19370847 View Larger
Petal 19370842 View Larger
Lavender 19370836 View Larger
Raffia 19370331 View Larger
Light Grey 19370343 View Larger
Graphite 19370345 View Larger
Fresh Green 19370333 View Larger
Plum 19370346 View Larger

Tips To Remember:

Use a steel measuring tape
Round down to the nearest 1/8" for width
Round up to the nearest 1/8" for height
See Product Specifications for more specific product info.
Sizes should always be provided in this format: Width x Height
On any measurement given, the factory does have a +/- 1/8 of an inch variance allowance.

Measure For Cellular Blinds

Inside Mount Width

•    Measure the exact width (left to right) of the inside edge of the window frame in three places (top, middle and bottom).
•    Take the smallest of the three measurements to the nearest 1/8 of an inch.
•    The factory will take an approximate 3/8 of an inch deduction from the total width (headrail and fabric) to allow for correct installation.

Inside Mount Height

•    Measure the exact height (top to bottom) from the top inside edge down to the window sill in three spots across window.
•    Take the largest of the three measurements.

Outside Mount Width

•    Measure the exact width (left to right) of the wooden or metal window frame (outer edge) OR how wide you want the product to be.
•    Be sure to measure wide enough as to cover the entire window plus offer enough coverage to avoid light or privacy gap. This is especially important if you have no trim and are installing to sheet rock or dry wall surface. 1-2 inches past the opening on EACH side is suggested if you do not have molding/trim.
•    French doors-you should have a minimum of 1 inch past the glass on each side added to the glass measurement for coverage.

Outside Mount Height

•    Measure the top and bottom edge of window frame/trim. If no trim, be sure you provide the height you want the shade to be from top of the headrail to bottom of the bottom rail.
•    Be sure to allot for coverage for light control and mounting hardware if mounting above window opening to wall surface. You will need 2 inches of surface area to mount above opening. Call us for further instruction if needed.
•    French doors-Be sure to add 2 inches for mounting above glass on surface of door for installation brackets and 2 inches below for hold down bracket install.-Call us for more information on this type of install.

Installation Instructions